基于平面不封闭图形切割的路径规划

在平面切割环节中，如何确定更短切割路径以减少加工成本、降低设备损耗和提升切割质量是工业应用和学术研究的重点。目前国内外对平面切割路径的研究主要集中于封闭图形，为此，针对在激光刀模行业中不封闭图形的问题，提出一种基于禁忌搜索的贪婪算法和贪婪准则的局部优化。首先使用构建型的贪婪算法和改进型的禁忌搜索算法相结合的方式对加工过程中的图元路径进行优化排序，随后提出贪婪准则的局部优化系数，削弱贪婪算法的“贪心”思想，解决加工路径的规划和优化问题。实验数据表明，禁忌搜索的贪婪算法和局部优化在对切割路径的规划和空行程优化上有显著效果，空行程减少50%以上，并且其优化性能和图元数量成正比，能有效地解决刀模行业以及其他激光雕刻行业中图形不封闭的切割难题。     

Torsional statics of two-dimensionally functionally graded microtubes

A size-dependent governing equation is derived to investigate the torsional static behaviors of two-dimensionally functionally graded microtubes based on the modified couple stress theory. The shear modulus is assumed to vary along the tube’s length direction according to an exponential distribute function, and varies along the tube’s radius direction according to a power-law function. A generalized differential quadrature method is developed to determine the rotational angle and shear stresses. Some illustrative examples are given to investigate the effects of applied torques, the length scale parameter and various material compositions on the torsional angle and shear stresses.     

Analysis of postbuckling of graded porous GPL-reinforced beams with geometrical imperfection

This research is concerned with the analysis of post-buckling of a nano-composite beam reinforced by graphene plateletes (GPLs) having geometrical imperfection. GPLs are uniformly and nonuniformly distributed thorough the thickness direction. Different porosity distributions are considered. The elastic properties of the nanocomposite are obtained by employing Halpin-Tsai micromechanics model. The postbuckling load-deflection relation is obtained by solving the governing equations having cubic nonlinearity applying Galerkin's method needless of any iteration process. New results show the importance of porosity coefficient, porosity distribution, GPL distribution, GPL weight fraction, geometrical imperfection, and foundation parameters on nonlinear buckling behavior of porous nanoscale beams. Specially, porosities and GPL reinforcement have a great impact on postbuckling configuration of both ideal and imperfect nanocomposite beams.     

攀枝花朱矿南帮边坡稳定性的运动学分析

露天矿山开采后，形成多台阶高陡岩质边坡，结构面揭露，大量发育的结构面对岩质边坡的稳定性起控制作用。通过立体投影与矢量代数理论建立的运动学分析方法，广泛应用于受结构面控制的岩质边坡稳定性研究。以攀枝花朱矿南帮边坡为例，应用DIPS软件，对该岩质边坡进行运动学分析，结果表明：南帮边坡在优势节理面切割下，易和坡面组合形成楔形体滑动；岩体下部若存在流层面，易于和贯通的节理面组合形成较大规模平面滑动。     

Stochastic evaluation of leakages through holes in wrinkle networks of composite liners

This paper presents a study on stochastic evaluation of leakages through holes in wrinkle networks of composite liners. The statistical parameters of wrinkles are used as indexes to describe the spatial distributions of wrinkles in a wrinkle network and the wrinkle density is modeled as a random field in the proposed approach, which allows the construction of a database about how wrinkles may be distributed in different conditions and provides input parameters for leakage evaluation at the design stage when the site has not been constructed yet and the aerial image of the wrinkle network (AWN) is unavailable. Statistical analyses were performed on wrinkle geometric parameters and wrinkle density of wrinkles from three sites reported in the literature. The procedures of generating random wrinkle networks (RWNs) based on the statistical parameters of wrinkles are introduced. The proposed approach was applied to typical examples and showed sufficient accuracy when compared to the evaluated leakages based on the corresponding AWNs. Wrinkle density is recommended to be modeled as random field.     

基于STM32的开环霍尔电流传感器的温度补偿研究

研究了一种基于软件补偿结合恒流源补偿的改进温度补偿方法,应用单片机、恒流源、数字温度传感器、乘法器等硬件电路,对传统软件补偿进行了优化,补偿效果较传统恒流源补偿有了明显提升,“温漂”整体下降了约13.7%。在传统的温度补偿方法如热敏元件补偿、恒流源补偿、软件补偿等方式上做了补充,对于霍尔电流传感器精度的提升及实际生产需求的满足有重要意义。     

2.5 GHz城市环境电磁态势的计算与补偿

复杂城市空间的电磁态势分布可以通过电磁场数值计算的方法进行预测。文章使用矩量法(MOM)结合一致性几何绕射理论(UTD)的方法对2.5 GHz频率下某小区环境中的电磁态势进行了仿真计算以及实际测量。场景中的树木结构在此频率下显示出比较强烈的波动性,对电磁仿真计算结果产生了不可忽略的影响,文中将其对仿真计算结果的影响进行了单独建模仿真,给出其产生影响的经验值,对仿真结果进行修正。修正结果与测量结果对比证明该经验值在该频率下可以有效补偿计算结果的缺失。     

复合固体推进剂中固体填料的安息角测试与仿真

复合固体推进剂含有固体颗粒较多，离散单元法是一种适合固体推进剂生产过程数值仿真的有效方法，颗粒物料的接触参数是保证离散单元法仿真精度的关键。本文以复合固体推进剂的主要组分铝粉和高氯酸铵固体颗粒为研究对象，通过实验测试获得了相关物料的安息角，利用专业离散元软件EDEM仿真模拟了安息角测试实验过程，建立了物料安息角与接触参数之间的联系。研究表明，滚动摩擦系数和滑动摩擦系数越大，安息角越大，物料流动性越差。对比仿真与实验结果，通过逆向反推法确定了物料的滑动摩擦系数和滚动摩擦系数两个关键接触参数。铝粉与高氯酸铵1∶2混合颗粒的滑动摩擦系数为0.2，滚动摩擦系数为0.05。为固体推进剂加工生产过程离散元数值仿真提供了关键基础数据。     

A grounded theory examination of project managers' accountability

26 interviews were conducted with a snowball sample of project managers to explore how project managers were influenced by accountability arrangements and how they responded to accountability demands. Using a grounded theory approach to code the interview data, this study revealed that project managers develop new skills to respond to accountability demands. These effects are facilitated by the interaction of resource-based mechanisms and reflexivity that interact with the contextual factors of the project. The study broadens the understanding of accountability in project management and suggests a model for further empirical examination.